Our Products for Mechanical Rubber Goods

Rubber Blacks

ApplicationsProperties / Suitability
CORAX® N 115Mechanical Rubber Goods for high severity conditionsVery good tensile strength, tear and abrasion resistance
CORAX® N 220Mechanical Rubber GoodsHigh abrasion resistance, high tear strength, high tensile strength
CORAX® N 234Tank pads, conveyor belt coversExcellent abrasion resistance
CORAX® N 326Mechanical rubber goods for high severity applicationHigh abrasion resistance
CORAX® N 330Mechanical Rubber Goods for high severity applicationHigh abrasion resistance, good processability at higher filler loading
CORAX® N 339Highly stressed Mechanical Rubber GoodsHigh abrasion resistance and good dynamic properties
CORAX® N 347Highly stressed Mechanical Rubber Goods, Construction profilesHigh abrasion resistance, high tensile strength
CORAX® N 375Highly stressed Mechanical Rubber Goods, Conveyor belt coversHigh abrasion resistance, high tear resistance, high tensile strength
CORAX® N 539Mechanical Rubber Goods, Extruded products, dynamically stressed articlesGood extrudability and smooth surface of extruded products
CORAX® N 550Mechanical Rubber Goods, extruded productsExcellent extrudability and smooth surface of extruded products
CORAX® N 650Mechanical Rubber Goods, extruded profiles, hoses, transmission beltsGood extrudability and high elasticity as well as good dynamic properties.
CORAX® N 660Mechanical Rubber Goods, Transmission beltsGood processability of rubber compounds and excellent dynamic properties of the vulcanizates
CORAX® N 683Mechanical Rubber Goods, Extruded profilesVery smooth surface and good dimension stability in extruded and calendered articles
CORAX® N 772Mechanical Rubber Goods, Transmission belts, Molded goodsGood dynamic properties and high elasticity
CORAX® N 774Mechanical Rubber GoodsGood dynamic properties, low compression set, high elasticity
PUREX® HS 25Mechanical Rubber Goods, Extruded productsOutstanding extrusion properties, very good surface quality
PUREX® HS 45Mechanical Rubber Goods, extruded products, molded goodsOutstanding extrusion properties, very smooth surface
PUREX® LS 35Mechanical Rubber Goods, extruded products, molded goodsVery good filler dispersion and excellent surface quality
DUREX® 0 pelletizedExtrusion compounds based on EPDM and other polymers, damping elements, transmission beltsExcellent extrudability, very good dynamic properties and low compression set.
PRINTEX® L 6 pelletizedElectrically conductive and anitstatic rubber goodsImparts high electrical conductivity
PRINTEX® XE 2Electrically conductive and antistatic rubber goodsAlready in small dosages it leads to very low surface or volume resistance
DUREX® 0 PowderSpray solutions for tires, extrusion compounds based on EPDM and other polymers, damping elements, transmission beltsHigh quality of profile surface concerning smoothness, colour and shine. Vulcanizates exhibit low copression set, good dynamic properties and high elasticity.
CK 3Seals, rubber-to-metal bonding compounds,molded goods, unvulcanized sheets and adhesivesExcellent tensile strenght, elongation at break and cut growth resistance during flexing
CORAX® N 326 MPMechanical Rubber Goods for high severity applicationGood abrasion resistance, good tensile strength, tear resistance and good fatigue and flex cracking resistance.
PUREX® HS 40Mechanical Rubber Goods, extruded products, dynamically stressed articlesGood extrudability and very smooth surface
PUREX® HS 22Mechanical Rubber Goods, Extruded productsOutstanding extrusion properties, very good surface quality
PUREX® HS 55Extruded profiles, molded goodsHigh UHF absorption, low die swell, excellent surface aspect

Rubber Silanes

Silanes that form polysulfidic cross-links (Si 69®, X 50-S®, Si 75® and X 75-S®) are ideally suited for products subjected to significant dynamic stresses. On the other hand, high stress resistance and low compression set call for silanes that build short-chained cross-links (Si 264, VP Si 163). Depending on the individual requirements, a suitable product can be selected. For mechanical rubber goods, especially our range of COUPSIL® products can be recommended.

ApplicationsProperties / Suitability
Si 69®General use silane for achieving good dynamic properties, low compression set and high abrasion resistance in mixtures containing white fillers.
Si 75®Disulfidic silane for good dynamic properties, reduced compression set and high abrasion resistance of mixtures containing white fillers that carry silanol groups. Due to its disulfidic group, Si 75® is – compared to Si 69® – less sensitive towards high mixing temperatures and thus facilitates onward processing
Si 264Monosulfidic silane for achieving high abrasion resistance in mixtures containing precipitated silica. Si 264 prevents premature particle coverage and offers greater processing reliability than VP Si 163.
X 50-S®General use silane for achieving improved dynamic properties, lower compression set and higher abrasion resistance in compounds containing white fillers.
X 75-S®Disulfidic silane for good dynamic properties, low compression set and high abrasion resistance of mixtures containing white fillers that carry silanol groups. Due to ist disulfidic group, Si 75® is compared to Si 69® less sensitive towards high mixing temperatures and thus facilitates onward processing.
COUPSIL® 6109Precipitated silica (ULTRASIL® VN2) that has been pre-reacted with Si 69® and can be added as a powder to the mixture. Can be used as an alternative to Si 69® in combination with a high-surface precipitated silica. Due to the precipitated silicas lower specific surface, COUPSIL® 6109 leads to lower compression set versus COUPSIL® 8113.
VP COUPSIL® 6411A precipitated silica (ULTRASIL® VN 2) which has been pre-reacted with Si 264. Can be used in combination with a high-structure precipitated silica as an alternative to Si 264.
VP COUPSIL® 6508A precipitated silica (ULTRASIL® VN 2) which has been pre-reacted with VTEO for use in peroxide covered mixtures. Can be used in combination with a high-structure precipitated silica as an alternative to VTEO.
COUPSIL® 8113A precipitated silica (ULTRASIL® VN 3) that has been pre-reacted with Si 69®. Available in powder or granule form for easy addition to mixture. Can be used as an alternative to Si 69® in combination with a precipitated silica.
COUPSIL® 8113 GRA precipitated silica (ULTRASIL® VN 3) that has been pre-reacted with Si 69®. Available in powder or granule form for easy addition to mixture. Can be used as an alternative to Si 69® in combination with a precipitated silica.
VP Si 163Mercaptosilane for high abrasion resistance and low compression set in mixtures containing white fillers that carry silanol groups. In case of high doses, care must be taken to not let the mixture vulcanize during the manufacturing or onward processing.
Si 266®Disulfidic silane for good dynamic properties, low compression set and high abrasion resistance of mixtures containing white fillers. Due to its disulfidic group, Si 266® is compared to Si 75® – even less sensitive towards high mixing temperatures and thus significantly facilitates onward processing.
X 266-S®Disulfidic silane for good dynamic porperties, low compression set and high abrasion resistance of mixtures containing white fillers that carry silanol groups. Due to its disulfidic group, X 266-S® compared to X 75-S® even less sensitive towards high mixing temperatures and thus significantly facilitates onward processing.
VP Si 363Reinforcing agent for compounds with precipitated silicas and white fillers for coloured and light couloured products for achieving optimum dynamic properties like reduced hysteresis, low heat build-up and low compression set.
VP Si 263Mercaptosilane for high abrasion resistance and low compression set in mixtures containing white fillers that carry silanol groups. In case of high doses, care must be taken to not let the mixture vulcanize during the manufacturing or onward processing.

Rubber Silica

ApplicationsProperties / Suitability
ULTRASIL® 360Manufactured rubber goods that depend on low residual deformation under pressure as well as excellent dynamic properties.
ULTRASIL® 880Outstanding injection molding characteristics and very low residual deformation under pressure.
ULTRASIL® AS 7Manufactured rubber goods with good processing characteristics
ULTRASIL® VN 2Manufactured rubber goods
ULTRASIL® VN 2 GRManufactured rubber goods
ULTRASIL® VN 3Products with high abrasion resistance.
ULTRASIL® VN 3 GRProducts with high abrasion resistance.