Metal Stamping tooling

Metal stamping dies is a process in which a tool, called punch enters into the workpiece and leaves a hole in it by removing the slug from the metal. The hole can be of any size and shape.  Metals that are mostly punched are aluminum, Galvanized Steel, copper, zinc, titanium among others. The tool used for the metal punch tooling can be manual or CNC controlled.

The metal stamping machine consists of two parts named, die and punch. There is the clearance between die and punch so that the punch could not stab the die. The amount of clearance depends on the thickness and hardness of the material to be punched.

metal stamping dies
metal stamping dies

Metal punch tooling process

In this process, the flat metal is placed between the die and the punch. The punch enters into the surface of the metal and exerts a force on it. When force overwhelms the tensile strength of the metal, the metal breaks and a hole is created in it. then, the punch is pulled back from the metal. The slag obtained from the hole is removed from the punched part and collected into a container. This slag may be recycled or used for other purposes.

The level of pressure which the punch exerts on the metal depends on the type and thickness of that metal. The rule is to use the punch having pitch not less than two times the thickness of the metal to be punched. The selection of the punching machine is an important decision. The punch having appropriate and quality material should is selected for this purpose. A variety of machines are available ranging from manual punches to hydraulic automatic punching machines.

CNC programs have automated the entire process, so, the whole system is operating on commands. There are specific commands for each shape and for each type of movement. When tooling complete its operation on one coordinate it automatically moves to the next coordinate. This process is extremely quick, therefore, a large quantity of metal can be punched in a short time period.

Advantages of metal stamping tooling are the following:

  • It is a quick process.
  • The scrap obtained from the punching process can be reused or recycled.
  • It creates holes in different shapes and sizes.
  • If the same type of metal punch parts is to be prepared, then punch metal tooling is the most appropriate method.
  • It is sometimes a very cost-effective process for medium and high volume production processes.
  • Metal punch tooling has its applications in many industries including aerospace, construction, and electronics industry for the processing of metal foils and punching of metal profiles into metal sheets.

Conclusion Metal punching is a process in which holes of different sizes and shapes are created in the metals. The punches used for his process can be manual or hydraulic automatic punching machines. CNC has computerized the whole process and all the work can be done with the help of commands given to the computer. Metal punch tooling has its applications in many industries including aerospace, construction, and electronics industry.

Injection Molding

When it comes to dealing with the world of production and manufacturing, some of the hardest choices you are going to make are going to revolve around the services that you plan to contract. In today’s economy, it is virtually easy to produce all of your products in-house. Not only would this need millions of dollars of capital, but it would also be the least cost-effective way to about manufacturing your products. This means that you are going to have to make a judgment on a number of various company’s assets and strengths. When you are dealing with injection plastic, you will want to ensure that you are dealing with a top-class firm that has mastered the producing of injection molding parts.

plastic molding
plastic molding

What types of industries use injection mold? The reality is that you will find injection plastic in almost every type of industry. Household electronics, Cosmetics injection molding, defense, and even computers all have a remarkable need for plastic molding. This means that you are going to want to find a firm that is able of dealing with a diverse roster of customers. When you find a firm that has the capability to serve a number of different customers from different industries, you know that you have a firm that puts the needs of the customers above all else. This may make sense, but you want to know how you can tell that you have found this type of firm.

When it comes to injection molding, the answer is the location. More vitally, the answer is locations. We live in an international economy. This means that we trade with businesses all over the planet. An international economy also means that big businesses have offices in a number of different countries. The ideals of localism are still intact, but localism has come to favor the full global economy and not just businesses in your location. The injection plastic producing process needs a number of different steps, such as injection molding, injection tooling, assembly, and finishing. These steps cannot possibly be done in one location.

The top injection molding service is going to do the work where it needs to be performed. In other words, if it makes the most sense to do the molding in Mexico and the assembly injection molding china, the top firm will make this happen. Likewise, this injection molding company is also going to know that its customers operate by the same international ideals and will be capable to ship the parts anywhere on the planet.

Plastic Injection Moulding Serves Various Industries

Injection moulding is an outstanding industrialized system used to make parts from plastic materials. In order to meet this, the molten plastic is injected into a mold at a high force. It is then injected into the inverse design of the wanted shape to produce the shape in the way it needs to be designed.

This is a technique where dissimilar molded pieces are contrived from thermosetting or thermoplastics plastics. In easy terms, it is a process in which the plastic, softened by heat is hard-pressed from a tube into a comparatively chill aperture, shaped in the type of the object to be produced. It has attained amazing eminence and made an important impact in a big range of industries like automotive, aerospace, toys, consumer products, plumbing, medical, construction, and packaging. This technique is followed in the production of little parts and even in producing the full body of certain equipment.

There are different kinds of molding such as injection blow molding, injection molding, film insert molding, compression molding, gas assist molding, thermoforming, rotational molding, and structural foam molding.

Some of the industries which make use of this method: in recent trends, the emergence of these type of firms are high due to the customers’ demands for the products. Almost all industries make use of molds and some of the industries which make use of it are gas and oil, agricultural, construction, automotive, electrical, medical, food, consumer products, and lots of industries are making huge use of injection molds.

The gas and oil industry functions in powerful surroundings and need supplies that should be resistant and tough to corrosion. The system contains gas compression, gas generation, gas molding, monitoring, and process control.

Medical injection molding
Medical injection molding

Medical injection molding has now become one of the powerful emergent industries in America and other main countries across the sphere. Even if this practice has its applications in all industries, this has to be reviewed more carefully as even the least fault can cause a huge blunder when it comes to this industry.

In this targeted procedure the plastic capsules are heated and melted down in a cylinder and forced into molds to figure the medical tools.

Medical appliances like orthopedic devices, heart pump parts, heartbeat monitors, oxygen and EKG parts and other various parts are produced. FDA approval is a must.

Plant containers, cooling spray jets, berry tray without a divider, berry tray with divider, grape toes, cucumber tote, and assorted berry lugs. Likewise, there are other several items done with this method.

Plastic Mold Manufacturers

Plastic Mold Manufactuers are workers in the manufacturing industry who make jigs, fixtures, dies, molds, machine tools, cutting tools (such as milling cutters and form tools), gauges, and other tools used in manufacturing processes.
[1] Depending on which area of concentration a particular person works in, he or she may be called by variations on the name, including tool maker (toolmaker), die maker (diemaker), mold maker (moldmaker), tool fitter (toolfitter), etc.
 
Tool and die makers are a class of machinists who work primarily in toolroom environments—sometimes literally in one room but more often in an environment with flexible, semipermeable boundaries from production work. They are skilled artisans (craftspeople) who typically learn their trade through a combination of academic coursework and hands-on instruction, with a substantial period of on-the-job training that is functionally an apprenticeship (although usually not nominally today). Art and science (specifically, applied science) are thoroughly intermixed in their work, as they also are in engineering. Mechanical engineers and tool and die makers often work in close consultation. There is often turnover between the careers, as one person may end up working in both at different times of their life, depending on the turns of their particular educational and career path. (In fact, there was no codified difference between them during the 19th century; it was only after World War II that engineering became a profession exclusively defined by a university or college engineering degree.) Both careers require some level of talent in both artistic/artisanal/creative areas and math-and-science areas. Job-shop machinists can be any combination of toolmaker and production machinist. Some work only as machine operators, whereas others switch fluidly between toolroom tasks and production tasks.
 
Traditionally, working from engineering drawings, tool makers marked out the design on the raw material (usually metal or wood), then cut it to size and shape using manually controlled machine tools (such as lathes, milling machines, grinding machines, jig borers, and jig grinders) and hand tools (such as files). Many tool makers now use computer-aided design , computer-aided manufacturing and CNC machine tools to perform these tasks.
 
Tool making typically means making tooling used to produce products. Common tools include metal forming rolls, lathe bits, milling cutters, and form tools. Tool making may also include precision fixturing or machine tools used to manufacture, hold, or test products during their fabrication. Due to the unique nature of a tool maker’s work, it is often necessary to fabricate custom tools or modify standard tools.
Die making is a subgenre of tool making that focuses on making and maintaining dies. This often includes making punches, dies, steel rule dies, and die sets. Precision is key in die making; punches and dies must maintain proper clearance to produce parts accurately, and it is often necessary to have die sets machined with tolerances of less than one-thousandth of an inch.
 
A jig maker is another term for a tool and mold maker or fixture maker, usually in woodworking or in the metal industries. Actually a jig is what mounts onto a workpiece, and a fixture has the workpiece placed on it, into, or next to it. The terms are used interchangeably though throughout the industry. A jig maker needs to know how to use an assortment of machines to build devices used in automation, robotics, welding, tapping, and mass production operations.
 
They are often advised by an engineer to do the pre-planned work of building the much-needed devices. In a production shop, they need to know about an extensive assortment of machines, tools, and materials and are often the most experienced toolmakers or woodworkers. They are often the ones who create from the original plans, the jigs, the fixtures and devices designed by and with the occasional assistance of the production engineer.
 
The reason jig makers need to be experienced is so that they can make suggestions for efficient alterations and needed repairs. They sometimes assist and monitor the progress of the jig or the fixture’s gauging, locating, and innovative ability. Those who graduate to the level of jig and fixture makers often go on to gain automation skills, and the use of air, and electronic clamping procedures, and automation principles and equipment. They often need to know not only how to use basic machines to cut and machine steel and wood. For the most advanced, they need to be familiar with switches and the use of air supply equipment, various instruments, switches, hydraulic clamps, gauges, and more.
 
Properly built jigs and fixtures reduce waste, and produce perfect fitting parts, cutting out too much expensive handwork, mistakes and waste. Most are portable and can be built or even moved throughout a facility. Some jigs and fixtures are as big as a car for placing a whole fender or chassis into them for assembly. It is how every volume shop works. The need for jigs and good gauging is necessary for furniture making for controlling quality and repeatability. A jig maker focuses on building tools in order to avoid placing parts incorrectly.
 
Molds (or molds; see spelling differences) are fungi that grow in the form of multicellular filaments called hyphae.
[1] In contrast, microscopic fungi that grow as single cells are called yeasts. A connected network of these tubular branching hyphae has multiple, genetically identical nuclei and is considered a single organism, referred to as a colony or in more technical terms a mycelium.
 
Mold in the home can usually be found in damp, dark or steam filled areas e.g. bathroom or kitchen, cluttered storage areas, recently flooded areas, basement areas, plumbing spaces, areas with poor ventilation and outdoors in humid environments. Symptoms caused by mold allergy are watery, itchy eyes, a chronic cough, headaches or migraines, difficulty breathing, rashes, tiredness, sinus problems, nasal blockage and frequent sneezing.
 
Growth in buildings and homes
Main articles: Mold growth, assessment, and remediation and Indoor air quality 

Mold growth in buildings can lead to a variety of health issues. Various practices can be followed to mitigate mold issues in buildings, the most important of which is to reduce moisture levels that can facilitate mold growth.[6] Removal of affected materials after the source of moisture has been reduced and/or eliminated may be necessary for remediation.
 
Auto Fitting Moulds
Automotive Mouldings
Automotive Mould
Bolt Dies
Cast Aluminum Molds
Compression Molds
Cube Moulds
Feeder Die
Flat Thread Rolling Dies
Frp Mold
Hand Molds
Industrial Molds
Injection Moulding dies Injection Moulds
Jigs
Laboratory Molds
Moulding Block
Plastic Dies
Plastic Dies & Mold
Plastic Injection Mold
Plastic Molded Products
Plastic Molds
Plastic Moulding
Polycarbonate Mold
Polystyrene Mold
Polyurethane Mold Precision Moulds
Preform Moulds
Shell Mould
Soap Moulds
Stainless Steel Molds
Thermoforming Molds
Thermoset Injection Mould
Tube Draw Dies
Tungsten Carbide Dies
Tungsten Carbide Heading Dies
 
GC Precision Mould is a moulds & plastic mold manufacturer dealing in Moulds, Plastic Injection Moulds, Plastic Moulds, Blow Moulds, and Industrial Injection Moulds in India. We are Mould Manufacturers, Mould Exporters, Mould Makers, Plastic Injection Mould India, Plastic Moulds Manufacturer, Injection Moulds Manufacturer, Injection Molding Equipment Supplier, Automatic Injection Molding Machines India, Plastic Injection Mold Part Supplier, Injection Mold Tool Exporter, Plastic Injection Molding Products Supplier, Plastic Injection Mold Designing Company, Custom Injection Molding Manufacturer, Blow Moulds Exporter, CNC Turning Centre, CNC Milling Machine India, Tool Maker in Gujarat, India.  We have developed and manufactured molds and dies for the following industries like  Automobile, Home-appliances, Oil & Paint, Refrigerator Clear Components, Refrigerator, Lighting Industry, Material Handling (Crates), Irrigation, etc.

Plastic Molding China

GC Precision Mould was founded in 2005, is plastic molding china company has about 12 years’ experiences in making plastic mold & injectiion molding service . GC mold has two branch factories in China Mainland and an office in America:One Factory is located in Bao’an District ,Shenzhen City . All of the molds are DME and Hasco standards and exported to America and European countries .

The other factory locates in Wangniudun District, Dongguan City. It mainly makes large molds for Automobile parts , Home appliances enclosures , etc. It has complete sets of machines for making large molds and finished products , such as 3 meters CNC and 3 meters horizontal CNC ,3 metres EDM and can make molds limited at 40 tons . All of the two factories have passed the ISO9001 and UK certificate . We just operated a factory in Jiangxi province . It mainly produces small precision plastic molds

We have many Various sophisticated processing and production equipment.,Example:

Sophisticated injection molding machines (Sumitomo)

Digital control processing center (MIKRON)

Sophisticated wire-cut machine (Makino,Japan)

MAKION Electric discharge machines, Tai-E discharge machines

Sophisticated grinding machines Okamoto

Graphite machines (MAKION)

CMM (Classic)

Automatic coating line from Kawaguchi, Japan, 4 flow.

Advanced injection molding equipment:

We have 30 sets of JSW automotive injection molding machine and 69 sets of closed-loop hydraulic high speed injection machines.

Sophisticated injection

In order to meet the needs of market competition, we orient our products on the high sophisticate injection. The injection machine is equipped with the advanced robot manipulator that controls more precisely on the injection pressure, speed and position of rubber injection that ensures a stable quality.

Abundant in Auxiliary Equipment

We have 2 sets of cooling towers with 100T as cooling system, the powerful cooling effect greatly improves efficiency of production. Equip with 45 sets of multi mould temperature controller that can regulate temperature of all injection mould simultaneously and independently, which ensures a more stable quality of products.18 sets of warm-clearing drying machines and 10 sets of hot air dry machines that ensures the raw material get full drying so as to ensure the quality of product.

 

Plastic molded parts

Plastic molded parts are everywhere in our culture partly because of the mass produced process that made them so readily and cheaply available; injection molding. Plastic molding has been around since the late 1800s, Plastic molded parts are everywhere in our culture partly because of the mass produced process that made them so readily and cheaply available; injection molding. Plastic molding has been around since the late 1800’s, although it wasn’t until the mid 1950’s that it started moving toward the popularity it holds today. That is also when the varieties of plastic types started developing and eventually entered the plastic market as options for products. Although there are many types, certain ones are used for certain applications because each polymer has its own characteristics, both positive and negative.

Examples of well known plastics include a few generalized titles with many subcategories falling within their characteristics. Thermoplastics are able to melt and harden numerous times, which means that any thermoplastic is able to be recycled. However, it becomes brittle and fragile when in intensely cold environments. On the other hand, thermosets are able to retain strength in cold weather even though they can only be melted and formed once. Elastomers retain a certain measure of elasticity and bounce once they have been molded and cooled, which means they are only used for certain types of products such as bouncy balls and tool handles.

Because all plastics are pliable as they heat up, it makes sense that as the heat is intensified plastic can be melted down to a molten, or liquid state. This is one of the characteristics that make a substance plastic, even though the general categories have some drastic differences. They are then able to be shaped as they cool into new and sometimes unique shapes, which they hold once they are solid again. Injection molded plastics reach particular standards of quality because the process eradicates air bubbles form the plastic as it cools and is also a very precise and clean process.

blow molding parts

Hollow blow molding parts in recent years China has shown a good development trend, the next in this market space will continue to expand.
In the Eleventh Five-Year at the end of China’s auto demand will reach 11.5 million. Automotive fuel tank, ventilation pipes, and water deflector various hollow tank will substantially increase the demand for products.
Tray is a modern logistics industry in warehousing, transportation indispensable consumables. Head of China’s domestic traffic tray of about 80 million each year, trays of materials including wood, paper, plastics, wood and metal and so on, the fastest pace of development in plastic, in which hollow blow molding parts tray strength, the best life. At present, only three hollow tray production line, with an annual output of around 250,000.

Chemical packing barrels still to stabilize the market. With the development of chemical industry, 10L-20L chemical barrels packaging market 10 percent each year -20% of steady growth.

Barrier packaging market prospects were good. Barrier materials can be made into boxes or plastic bottles, used for seasoning, fruit juice, meat and other food packaging. In addition, it can be used in the production of cosmetics, pharmaceuticals, solvents, such as container, manufacturing, automotive fuel tanks, air-conditioning equipment and components such as pipelines.

PP injection Molding

With the spread of the global financial crisis, the global polypropylene market surplus increasing pressure, China on how to address it? The industry believes that this is China’s development of polypropylene great opportunity to be the momentum to accelerate the pace of big and stronger, in pursuit of the time to take effect in 2035 to establish China’s polypropylene in the international discourse and the leading position.
Increasing international status
In 2007, the world’s polypropylene PP injection molding production capacity has reached 46,982,000 tons, the market consumption reached 44.351 million tons.
China’s total production capacity of polypropylene has reached 6.91 million tons, second only to the United States, the world’s second largest producer, has been basically formed a solvent, liquid bulk – Gas Law, intermittent bulk liquid, gas law a variety of production processes simultaneously, small, medium and large production patterns of production patterns coexist. At present, China’s polypropylene production from the joint production of ethylene enterprises accounted for about 40% to oil refinery by-product propylene as raw materials account for about 60%.
China is a big country of consumption of polypropylene, high-speed growth in the consumer market brought about by the new polypropylene industrial investment boom. Expected around 2010, China’s polypropylene industry will enter a new round of investment in the peak period, there will be nearly 6.8 million tons production capacity put into operation one after another (including the expansion in construction projects). In these new devices, in addition to the size of a small number of sets of 200,000-ton, the overwhelming majority of more than 300,000-ton, reaching a world-class scale, anti-risk ability. If these projects can be put into operation as scheduled, in 2010 China’s polypropylene production capacity will reach 13 million tons.
Problems can not be ignored
It should be noted that there still exist in our country polypropylene production is small and low levels of intensive, low value-added products and issues, polypropylene industrial technological level and production capacity, compared with foreign advanced level there is still a gap.
As the domestic consumption of polypropylene increased rapidly, while the growth rate of output is relatively small, resulting in the supply of general-purpose resin grades, while high profile products vacancies serious. In the high-end market and some mid-market monopoly of foreign manufacturers by virtue of geography and low-cost advantages will continue to expand exports to China. Polypropylene plant in China are usually associated with the ethylene plant and oil refineries are built, mostly small and medium-sized devices, devices are too scattered layout. North devices polypropylene production of some commodities in addition to local processing of woven products, the other product south, transport costs are too high. PRD market saturated, the Yangtze River Delta with limited market potential. To seize the opportunity, some of polypropylene downstream processing enterprises in the strategic north, but the Northeast and Northwest market distance “stronger, bigger,” there is distance. Due to intense competition, polypropylene industry reshuffle is unavoidable, small and medium-sized device to gradually withdraw from areas of production will become an inevitable outcome.
Speed up development to meet the challenges
At present, the global polypropylene market surplus will face tremendous pressure. New Project in the Middle East has become a hot spot for polypropylene, the Middle East, several large-scale export-oriented devices put into operation, low-cost products will be an influx of large quantities of the country, and will gradually replace South Korea, Japan and other traditional export position as a major power, when China’s polypropylene business will also meet with strong shocks. China’s expansion in the construction of new capacity will also be put into production of polypropylene, the market will be a rapid increase in supply. Large amount of new capacity, industry restructuring intensified, but at the same time enterprises high raw materials costs, which will force enterprises to lower the operating rate, and the entire polypropylene PP injection molding industry profitability will be different effects. As a result of new capacity is too concentrated, the market will focus on capacity expansion to digest the peak of the formation of capacity, competition to enter the white-hot state. In this regard, China’s polypropylene industry must speed up the development of the challenge.
First, stepping up the expansion of polypropylene in the construction projects to meet the domestic market consumption. Since 2008, Zhongyuan Petrochemical, Maoming Petrochemical successfully put into operation, such as polypropylene, as well as refining and other large enterprises in Ningxia started a new round of expansion in Jianhe prelude to promote domestic production of polypropylene and enhance product quality, expanded polypropylene production upgraded to world-class scale, the project has increased the overall strength and ability to resist risks. Judging from the pattern of production capacity, the vast majority of radiation Sinopec new capacity to the Pearl River Delta and Yangtze River Delta and Bohai Rim, China and oil installations all built on old industrial bases in northeast and northwest of the development of the region.

China mold company offer PP injection molding and any custom plastic molding
Secondly, to intensify the industry restructuring and mergers and acquisitions among enterprises, promote China’s chemical industry in the market competition. Domestic chemical enterprises should mainly rely on to improve the production scale, improve production efficiency to lower production costs, industry restructuring through mergers and acquisitions of domestic policies to promote the rapid development of chemical enterprises to change the past situation of high costs. That is, to develop into the upstream suppliers to reduce procurement and marketing costs; to use technological innovation to reduce product costs; an increase in production scale to reduce the costs of environmental protection products.
Third, to expand the international export trade. At present, the focus of the world’s polypropylene market is eastward, China with a close neighbor of India and China will become the world’s polypropylene consumption growth. In recent years the rapid growth of India’s economic development momentum, the rapid growth of disposable income, which significantly boosted consumption growth. India is Asia’s huge automotive, appliance and packaging of various food markets in the world, coupled with India is trying hard to improve the infrastructure, all this has stimulated strong growth in consumption of polypropylene, which will be a large number of imports of polypropylene derivatives. China’s polypropylene PP injection molding industry strength necessary to accelerate the use of geographical advantages of radiation neighbors, and the expansion of international export trade.

Chinese engineering plastics

According to the Chinese Engineering Plastics Industry Association and Secretary General Zheng Kai is expected to begin in early 2009, China’s engineering plastics will be a substantial reduction in demand is expected to range between 10% -15%, but the beginning of the end of next year is expected to increase gradually.

Mr Chan said: Generally speaking, the lower reaches of the demand growth is still rigid in digestion Stock End community, the demand for engineering plastics will rise; In addition, a series of stimulating domestic demand by national policies, some domestic varieties of works plastics demand will rise, for example, in railway construction, bolster the tracks and the train compartments have to be used in engineering plastic liner. How to peacefully pass the current difficult period, he suggested that domestic enterprises pay close attention to changes in market prices, timely adjustment of the production, and shutting down excess capacity, to give up low-profit market, the energy transfer to high-end market.

China Engineering Plastics Industry in 2007 sales of 1.84 million tons, an increase of 20.8%. But by the global financial crisis, this year sales of around two million tons, the growth rate will fall to about 10%.

Professional, quick and direct

Degussa Optimises its European-Wide Marketing Activities for Two Business Units

The business units Aerosil & Silanes and Advanced Fillers & Pigments of Degussa AG, Düsseldorf, have reorganised their European marketing departments. These units have set themselves the ambitious goal of offering their customers the best and most efficient service in Europe. Their two newly created sales centres, which are headquartered in Frankfurt on the Main, offer customers highly knowledgeable service and support the activities of the local field service. Direct contact with the customers, which extends across all national boundaries, occurs on an individual basis according to each company’s size and needs. The new sales centres are available to customers on workdays, twelve hours per day, including German holidays. In addition, new central distribution warehouses, which are under the direct management of the European sales centres in Frankfurt, have been established in Great Britain, the Netherlands, France, and Spain, replacing the previous local warehouses.

The sales centres in Frankfurt will support consulting work, answer a variety of questions, and handle all aspects of purchase order processing. Their main focus will be on customer satisfaction in every respect. Knowledgeable experts and a team of multinational employees, who have command of all the relevant languages, will communicate directly and professionally with our customers. A centralised and highly advanced computing infrastructure linking all sales, production, and storage units has permanently increased security of supply and also made it possible to provide rapid and efficient distribution processes that focus on the customer. This infrastructure makes it possible to ensure a reliable supply to customers.

The ambitious service goals that the new sales centres are now implementing in co-operation with the local sales forces are the result of comprehensive analyses. With customer requirements considered at every step, the entire process chain – from preliminary contacts to delivery – was examined with a critical eye, especially the organisational interfaces, warehouse locations, and delivery service.

Small particle – big impact. Aerosil & Silanes

The Aerosil Business Line of the Aerosil & Silanes Business Unit is one of Degussa AG’s core businesses. AEROSIL® is the brand name for a variety of pyrogenic silicas and special oxides that are sold in 95 countries and that are manufactured and further developed in five locations in Germany, Belgium, Japan, and the USA. The ultra-fine particle white powder selectively affects the flow behaviour of pharmaceutical products, coatings, paints, and liquid plastics. The powders are also frequently used to reinforce silicone compounds, and the microchip industry uses them for ultra-fine polishing agents. The business unit also manufactures Sivento®Silanes, which are indispensable in the production of composite materials, sealing and adhesive compounds, coatings and paints, and insulating materials. Silanes are also used in foundry applications.

The carbon black people. Advanced Fillers & Pigments

The Advanced Fillers & Pigments Business Unit is one of Degussa AG’s most important strategic business segments and is manufacturing in 17 countries and 26 locations world wide. The company is the only producer that sells carbon blacks, performance silicas, and rubber silanes from a single source. Specialising in surface chemistry and surface physics, it concentrates on the manufacture and application of carbon black, performance silicas, matting agents, functional organosilanes, and blue pigments. Its customers cover a broad spectrum. In addition to pharmaceutical companies and tire manufacturers, the printing, coatings, and paper industries are also represented in its customer base. Brands like ACEMATT®, ULTRASIL®, PRINTEX®, SIPERNAT®, CORAX® and Si 69® belong to the business unit’s product range.

For further information, please contact: